News
You are here : Home > News > Page 2

Empty distance data fluctuation analysis

Scenario 1: Decreasing empty distance Fluctuation ≤ 0.4 m: Likely antenna echo interference. Fluctuation > 0.4 m: Obstacles exist between radar and target. Scenario 2: Increasing empty distance Readings are appr

2026-08-07 

Why is there no blind zone alert when the target falls within the blind zone?

Answer: Suspended installation mode is enabled. Switch to standard installation mode to activate blind zone alerts (default blind zone 0.3 m, adjustable downwards). Suspended installation function: In complex echo scenar

2026-08-07 

Why does the radar water level measurement lag and respond slowly?

Answer: Our 80G radar operates at 76‑81 GHz and outputs valid data 1 second after power-on. Amplitude limiting filtering is enabled by factory default to smooth readings. Disable filtering for faster response — measureme

2026-08-07 

Can the radar be used directly after installation?

Answer: Additional configuration is required: set the installation height; calibrate current for 4‑20 mA output models. Installation height: Vertical distance from the water bottom to the radar hemisphere. After inputtin

2026-08-07 

Why does the liquid level display “Insufficient Echo Energy”?

Answer: Possible causes: Obstacles between the sensor and the target weaken reflected echo energy. The sensor is not parallel to the target surface, leading to weak reflected echoes. The measured target is not a flat sol

2026-08-07 

Measurement shows within blind zone

Answer: The measured distance is shorter than the blind zone distance; the factory default blind zone is 0.3 m. Solutions: Adjust the sensor-to-target distance to ensure it exceeds the blind zone. Reduce the blind zo

2026-08-07 

Exterior View of the Company Premises

Established in 2015, Shenzhen Jiajia Eye Technology Co., Ltd. is a professional high-tech enterprise dedicated to the research, development, and manufacturing of radar level gauges (RLG). Located in Shenzhen, the “

2026-03-27 

Level Gauge Calibration Test System

This high-precision calibration system is engineered for non-contact ultrasonic and radar level gauges, ensuring the accuracy and reliability of industrial level measurement instruments. It integrates a motorized linea

2026-03-25 

Test Chamber Image

The test dark box provides a sealed, interference-free testing environment for radar, RF and optoelectronic products. It effectively shields against external electromagnetic waves, light and stray signal interference, e

2026-03-25 
  

Copyright @ 2026 Shenzhen Jiajia Eye Technology Co., Ltd.

WhatsApp

No:89470